Quality is a question of the rights products!
Our products are not run-of-the-mill. Our aim is always to offer you the highest quality products. Our range is not broad, but selected and good!
No results were found for the filter!
Bucket ![FS-911_Scheinwerfertopf.jpg]( "FS-911_Scheinwerfertopf.jpg")
Bucket for LED head light model 8700. Also available chromed as point-mount version (FS-910-48701).
Scanner gun cradle ![RM-616_Scanner-Halter.jpg]( "RM-616_Scanner-Halter.jpg")
The scanner holder Drop-N-Lock™ is a specially developed holder for most types of hand scanners. A spring-loaded lever on the side of the holder holds the hand-held scanner...
Suction cup base, 1.5 in. ![RM-324-Saugnapfbasis-150.jpg]( "RM-324-Saugnapfbasis-150.jpg")
A RAM mount system always consists of a base, a compound and a device carrier. This base is a good start for your individual holder. Especially for smooth surfaces this flexible...
Suction cup, 1 in. ![RM-305.jpg]( "RM-305.jpg")
A RAM mount system always consists of a base, a compound and a device carrier. This base is a good start for your individual holder. Especially for smooth surfaces this flexible...
Suction cup Mighty-Buddy™ ![RM-310.jpg]( "RM-310.jpg")
A RAM mount system always consists of a base, a compound and a device carrier. This base is a good start for your individual holder. Especially for smooth surfaces this flexible...
Saugnapfbasis ![RM-312_Saugnapfbasis_000.jpg]( "RM-312_Saugnapfbasis_000.jpg")
Ein funktionierendes RAM-Mount-System besteht immer aus einer Basis, einer Verbindung sowie einem Geräteträger. Mit dieser Basis wird eine gute Grundlage für Ihren individuellen...
Round base, 3,38 in. ![RM-115_Basis_338.jpg]( "RM-115_Basis_338.jpg")
This round base is a good foundation for your individual RAM Mount system. This base has a diameter of 9.35 cm (3.68") and has four holes. Three of them in 120-degree angle, the...
Round base, 2.25 in. ![RM-114.jpg]( "RM-114.jpg")
This round base is a good foundation for your individual RAM Mount system. This base has a diameter of 6.2 cm (2 7/16") and has four holes in industry standard AMPS (rectangular...
Round base, 2.25 in. ![RM-112.jpg]( "RM-112.jpg")
This round base is a good foundation for your individual RAM Mount system. This base has a diameter of 9.35 cm (3.68") and has four holes. Three of them in 120-degree angle, the...
round base, 1,5 in. ![RM-123_runde_Basis_150.jpg]( "RM-123_runde_Basis_150.jpg")
With this round base, a good foundation for your individual mount of RAM Mount is created. This round base has a diameter of 2.5 "and has three holes in industry standard AMPS...
Backup Alarm AVR95 ![RW-1399_Rueckfahrwarner_AVR95.jpg]( "RW-1399_Rueckfahrwarner_AVR95.jpg")
Backup alarm with individual sound. The backup alarm AVR95 does not beep as conventional backup alarms do. It even don't have a broadband sound. It is much better! With this...
Backup alarm 800 series ![RW-028_Rueckfahrwarner_Serie800.jpg]( "RW-028_Rueckfahrwarner_Serie800.jpg")
The rugged back up alarm of the 800 series is equipped with a steel profile and a hardened metal case. Thus they are intended for tough use in a rough duty environment.
Backup alarm 600 series ![RW-1541_Rueckfahrwarner_Serie600.jpg]( "RW-1541_Rueckfahrwarner_Serie600.jpg")
Backup alarm with reflecting housing. The back up alarm of the 600 series is equipped with an audible warning system that sounds to the back of the reflecting housing. This...
Backup alarm 500 series ![RW-024_Rueckfahrwarner_Serie500.jpg]( "RW-024_Rueckfahrwarner_Serie500.jpg")
Standard back up alarm of reliable quality. Products of the 500 series are the back up alarm systems most purchased in Europe. A multi-voltage version (12-80 V) is also suitable...