Quality is a question of the rights products!
Our products are not run-of-the-mill. Our aim is always to offer you the highest quality products. Our range is not broad, but selected and good!
No results were found for the filter!
Heightened nut ![SS-073_Mutter.jpg]( "SS-073_Mutter.jpg")
This elevated nut is necessary for the installation of the dust protection cap (item no. SS-072-00111). Fits on various key switches (see list in entry of the dust protection cap).
Elektronische Hupe K91-EM ![HU-1067_Hupe_K91EM.jpg]( "HU-1067_Hupe_K91EM.jpg")
Elektronische Version der Hupe K91. Mit einem immensen Stehvermögen von über 1.000.000 Arbeitszyklen überlebt diese Hupe mit Sicherheit jedes Fahrzeugleben. Die Hupe kann mit...
Single screw base, 1 in. ![RM-135_Einzelschraubenbasis.png]( "RM-135_Einzelschraubenbasis.png")
This round base is a good foundation for your individual RAM Mount system. The base has a hole with a diameter of 11 mm. Tip: This base can also be used as a lightweight device...
Mounting adapter ![SS-071_Adapter.jpg]( "SS-071_Adapter.jpg")
For adapting during installation into a panel with a diameter of 26 mm. Fits on start switches: • 470013 • 470015 • 470017 • 470020 • 470254 • 470301 • 470302 • 470503 • 470530...
Rectangular base, 2.25 inch ![RM-144-Basis-225.jpg]( "RM-144-Basis-225.jpg")
This universal mounting plate consists of a 2.25" diameter rubber ball, connected at right angles to a flat 15.9x5.1 cm (6.25x2 inches)rectangular plate. The plate contains...
Rectangular base, 1.5 in. ![RM-128_Basis_150_Bosch.jpg]( "RM-128_Basis_150_Bosch.jpg")
This rectangular base is a good foundation for your individual RAM Mount system.
Rectangular base, 1 in. ![RM-102_Basis_100.png]( "RM-102_Basis_100.png")
This rectangular base is a good foundation for your individual RAM Mount system. The base measures 2,54x5,08 cm (1"x2") and has two holes at a distance of 3.81 cm (1.5").
Dock-N-Lock ![RM-723_Tablethalter.jpg]( "RM-723_Tablethalter.jpg")
The tablet holders of the Tab-Tite-series are suitable not only for iPads. They are the optimal device carrier for thicker tablets or e.g. when a heavy duty case is used to...
Rail base, 2.25 in. ![RM-236-Bügelbasis-225.jpg]( "RM-236-Bügelbasis-225.jpg")
A RAM mount system always consists of a base, a compound and a device carrier. This base is a good start for your individual holder. With this rail base there is no need of...
Rail base, 1.5 in. ![RM-210.jpg]( "RM-210.jpg")
A RAM mount system always consists of a base, a compound and a device carrier. This base is a good start for your individual holder. With this rail base there is no need of...
Rail base, 1 in. ![RM-228-Bügelbasis-100.jpg]( "RM-228-Bügelbasis-100.jpg")
A RAM mount system always consists of a base, a compound and a device carrier. This base is a good start for your individual holder. With this rail base you can mount you gear...
Bluetooth keyboard ![RM-712.jpg]( "RM-712.jpg")
Using a tablets is more comfortable with a keyboard. This keyboard has been specially developed for the keypad accessory and fits directly on its magnetic mount. Note: The...
Strobe light 400 series ![BL-365_Blitzleuchte_400.jpg]( "BL-365_Blitzleuchte_400.jpg")
Real xenon strobe light with good long distance visibility or for use in bad visibility conditions. Of course with ECE road approval. The mounting is done with a DIN holding...
Strobe light LP ![BL-467_Blitzleuchte_LP.jpg]( "BL-467_Blitzleuchte_LP.jpg")
Due to its low height the strobe light model LP only takes up very little space. Thus because of its unexposed mounting this light blends in nicely with the vehicle‘s contour.
Glare shield ![RM-807_Blendschutz.jpg]( "RM-807_Blendschutz.jpg")
This glare shield was precisely cut via acrylic laser. He has a dark green 50 percent tint and is equipped with a 1 "ball (size B).
Biegsame Verbindung ![RM-531_Verbindung.jpg]( "RM-531_Verbindung.jpg")
Ein funktionierendes RAM-Mount-System besteht immer aus einer Basis, einer Verbindung sowie einem Geräteträger. Diese Verbindung sorgt dafür, dass Ihr System sich flexibel an...